An electrician is definitely different and a lot more dangerous job than most of the other handymen. This job requires constant standing on the ladder, contact with the ceiling or the wall, constant work on an off-balance condition. Good boots or shoes that do not slip are a must. However, the tools that electrician carries are closely designed for that type of activity. Many tools are designed to protect an electrician from electric shocks or unprotected contact with the electricity. An additional role of a protective gloves, boots, and shoes is to keep the electrician protected from electric shock at any time.
The choice of a proper tool backpack requires the knowledge of the tools for electricians. The most important tool is a voltage tester. A voltmeter is also an important piece of the equipment, just as protective gloves. A good drill is also a need for any electrician. Other equipment is consisted of cutting pliers, electrical pliers, an electrician knife, bushings pliers, stripping pliers, a digital multimeter, a trigger insulation, a stripper, an electrician hammer, insulated tweezers, a crusade screwdriver, a wrench and a flat-blade screwdriver. A good electrician also needs to carry at least one extension cord in the tool backpacks. There is a possibility that it is difficult to reach the ceiling and walls.
Optionally, an electrician may carry a flashlight, attached to the head, and several screwdrivers of different sizes, to be able to reach the most inaccessible places. A wrench set is also recommended. A laptop or a tablet is also a matter of choice. The use of electric or cordless drill depends on whether an electrician introduces electricity or electricity is already introduced. It is good to have both in the backpack for tools.
An electrician backpack
The best tool backpacks for electricians should fulfill the following criteria:
- One-handed working – an electrician must use one hand for balance when on the ladder or on heights
- Good internal organization with a lot of loops and pockets – screwdrivers and pliers require good organization of the backpack
- Zip closure is definitively a better choice
- An existence of hip, waist, or chest straps
- A rubber tray on the bottom and special reinforcements in order not to be ripped if dragged down the floor of the construction site
- An existence of stiff fabric loops
- Sufficient size
My Pick of best tool backpack for Electricians
There are many backpacks for electrician in the market today. However after some research, I’ve came up with my top 3 choice. Here are my choice of best tool backpack for electricians.
Custom LeatherCraft 1132 75-Pocket Tool Backpack
It fulfills many criteria needed to a successful electrician – zip closure, a possibility of one-handed working and even 75 pockets. This can satisfy the needs of electricians definitively. Various types or screwdrivers might be organized in the best way.
It is a small bag, relatively light. However, if you want to carry a bigger drill or a laptop, this could be difficult, but there is enough space for a tablet. This backpack is not big, but it has a lot of loops, which means maximum grade for internal organization. Sections are, unfortunately, too narrow, so carrying bigger tools may be a problem.
One loop may always be separated for an extension cord, and optionally, you may even pack a lunch in a pocket. It contains 14-piece wrench sets, which is excellent for any good electrician. It is made of ballistic poly fabric, a very resistant material.
With the weight of 7.7 pounds and the size of 13 by 17-1/2 by 9 inches, it is a very good choice.
Open Toolbag by Snickers Flexi tool bags
This backpack has the best grades due to its simplicity. It is very simple for carrying. A hard frame, tight elastic loops and a bucket design with straps and loops. This is extremely suitable for one-handed work. Straps can be manually added.
It may be carried as a backpack, or in a hand. This tool backpack has an aluminum handle. Also, it is strengthened with rubber tray on the bottom. The best part is that it can be dragged down the concrete or dirty floor while minimizing the possibility of damage.
The backpack is open on the top, and there are no zips. This is excellent for one-handed work, but there is one big problem. The tool may fall if it is not attached well. If you slip, your tools may knock each other out. The bag is not too heavy.
Despite all the positive comments, additional attention is needed if you work on the ladder. The backpack cannot be zipped and you may need a lot of skill to balance the weight properly. This is also not suitable backpack if you need to transport your tools on a bigger distance. If you are a type of electrician who carries a lot of small tools and likes to work traditional style, without the use of laptop and heavy tools, this is a great choice for you.
DEWALT DGL523 Lighted Tool Backpack Bag
This is a good choice if you need a lot of loops and pockets. This backpack has 57 pockets. There is sufficient space on the inside, and internal organization is excellent for the dimensions of the backpack. There is enough place for the charger, battery, drill and a set of wrenches.
A LED light makes this best backpack for tools very special since you have the ability to find your tools even in the dark.
There are straps for easy carrying. Anatomic adjustment to the shape of your back is also possible, which is one more excellent thing. The backpack is strengthened with a heavy-duty cross-strap. It weighs only 4.6 pounds and has fold flat easy access panels.
Unfortunately, it is square and not too big. This makes this backpack a bad choice if the distance between jobs is long. If a set of large tools needs to be carried, DEWALT DGL523 is definitively not a good option. For example, there is not enough space for a laptop, you may only carry a tablet. It is made of a very resistant material.
If the possibilities of the backpack are compared to its price, DEWALT DGL523 is definitively an excellent choice.